Whether you want to build a backyard basketball court or set a foundation for an entire home, you'll need to get your hands on some quality concrete and use it to the best of your ability. There are a number of things you can do to create a successful concrete project — but it is ideal that you focus on getting the right materials, working safely, and maintaining the finished product. To this end, read below and use these tips to your advantage. 

#1: Shop For The Ideal Concrete

There are numerous manufacturers of concrete that you can do business with, so give yourself the benefit of shopping around. Ready mix concrete is ideal for any construction project that you have, since it will cut out some of the preliminary labor. Ask around for the best brands of ready mix concrete so that you know you are able to acquire top-notch materials. From here, speak to 5 to 7 different concrete specialists to get written cost estimates on how much it will cost to deliver this ready mix concrete to your worksite. You can expect this delivery to cost somewhere in the range of approximately $1200 and $4700.

#2: Work With Your Concrete As Safely As Possible

Because there are potential hazards for any kind of concrete construction job that you are putting together, you need to make sure that safety is your main priority. Back injuries are some of the most prevalent types of hazard you can experience on a construction site, so invest in a back brace and make sure that your workers are lifting with their legs. Acquire the best equipment so you do not have to do as much heavy lifting at all. However, make sure that any machinery that you purchase operates at less than 85 dB to decrease the likelihood of ear injury. You can purchase industrial-strength ear protection to prevent this and should also wear protective covering for your skin to prevent irritation.

#3: Maintain The Finished Product

It is very important that you allow the concrete to dry thoroughly and completely before allowing anything to come in contact with it. Partition off the concrete as it dries and make sure that it is covered and protected from the elements. Do your best to maintain the fixture throughout the years by filling cracks and keeping it free of debris. You can also buy a concrete sealer and have it applied at a cost between approximately $.15 per square foot and $2.50 per square foot.

Follow these tips and consult with professionals who can help you.

Share