If you have concrete that you need to cut through the best way to do this is by using concrete core drilling. There are many types of core drilling available, including the three types below. You can then get your concrete cut so you can start with your project.

1. Diamond Concrete Drilling

One common way a contractor drills through concrete is using diamond drilling. This works great as the drill can make perfectly sized holes deep into the concrete. This will work no matter if the structure is horizontal or vertical. The diamond drill will not vibrate as other types of drills will. This means the contractor can make the holes much quicker and fewer materials are also removed from the hole.

The diamond drill is made of steel pipe with a variety of diamond-like materials attached to the end of the pipe.

2. Hydraulic Concrete Drilling

Another type of concrete drilling is known as hydraulic drilling. This is the preferred type if the contractor has to make a deep and large hole in concrete. A good contractor knows different techniques that can be used to increase the rate of penetration. This will make the process go much faster, which can result in fewer labor costs you will have to pay.

A hydraulic pump is used to power the drill bit. The type of pump depends on how large and deep the hole is driving through the concrete. As the drill goes through the concrete, material is pushed through a tube that comes out in another area. This way, the concrete will not be in the hole at all.

3. Hammer Concrete Drilling

A hammer drill is much smaller when compared to diamond or hydraulic drilling. This means it will work best for smaller projects, such as cutting through a smaller concrete slab. Carbide bits are often used with this type of drill, as they are the least expensive. These bits cannot withstand heavy pressure, however, so they will only be used if the holes are not very deep. Stronger bits will be used for other types of drilling.

Make sure you hire a professional to do concrete drilling for you. This is because you need to ensure there is nothing underneath the concrete that you should not drill through, such as piping or electrical lines. The contractor can also explain to you in much more detail the different techniques that are used.

Share